در منابع تغذیه سری HED گریــــن اغلب ویژگی های پاور های رده بالا و گران قیمت را با پرداخــت حداقل هزینه ممکن تجربه خواهید کرد. تپولـــــــوژی مبدل هـــای DC-DC در بخش ثانویه، پروتکشن های ایمنی کامل و تقریـبـاً مشابه پاورهــای رده بالا، رگولاسیون ولتاژ بسیار دقیق و ریپل ولتاژ خروجی بسیار پایین در کنار استاندارد بازدهی مصـرف انرژی 80Plus Bronze تنها بخشی از قابلیت های این سری ارزشمند محســوب می شوند.

  • مناسب برای کاربردهای خانگی / اداری / گیمینگ
  • طراحی مدرن مبتنی بر مبدل های بسیار پربازده DC-DC دربخش ثانـویه
  • ریپل و نویــز کمتر از 35mv شاخه پر اهمیت 12V+ خـروجـی
  • مجـهز به کابل های تماماً تـخت (Flat) مشـکی رنگ جهـت اسـمبل زیباتر و گردش بهـتر هـوا
  • قابلیت ارائه حداکثر توان خروجی حتی در دمای محیط حداکثر 40C
  • دارای مدار تصحیح ضریب توان (Active PFC) با عملکرد بالاتر از 0.95 در شرایط اعمال بار %20 الی %100
  • بهره‌مندی از خازن‌های الکترولیت تایوانی TEAPO/CAPXCON از نوع 105C در بخش اولیه و ثانویه
  • بدون محدودیت در بارگـذاری متقابل (CROSS-LOAD) شاخـه ها
  • رگولـاسـیون ولتاژ کمتر از %2.5 در شـاخه ‎های اصــلی خروجی
  • بازدهی مصرف انرژی (Efficiency) بالا و کسب گواهینامه 80Plus Bronze
  • دارای تمامی پروتکشن‎های ایمنـی OVP/UVP/OCP/OPP/SCP/SIP/NLO
  • عملکرد هوشمند و فوق‌العاده کم صدای فن
  • 37 ماه گارانتی و 5 سال خدمات پس از فروش

 

پاورهای_سری_HED_گرین_یک_گام_جلوتر
 

  • توپولوژی مبدل‌های DC-DC به همراه یک‌سوسازی هم‌زمان (Synchronous Rectification) در بخش ثانویه

پاورهای سری HED بر خلاف نسل قبل که در طراحی بخش ثانویه آن‌ها از توپولوژی Group Regulation استفاده شده بود از جدیدترین و مدرن‌ترین طراحی حال حاضر یعنی مبدل‌هایDC-DC بهره می‌برد. در نسل HED به لطف استفاده از خازن های جامد با ESR بسیار پایین، علاوه بر افزایش طول عمر و مقاومت بسیار بالا در برابر حرارت برای این بخش، شاهد بهبود چشمگیر ریپل خروجی پاور نیز خواهیم بود.
 

پاورهای_سری_HED_گرین_یک_گام_جلوتر

همچنین به‌واسطه تعبیه مبدل‌های DC-DC در این بخش، ولتاژ هر یک از شاخه‌های اصلی خروجی (12V,+5V,+3.3V+) به‌صورت کاملاً مستقل ساخته و پرداخته می‌شود. این امر در عمل باعث تثبیت بیش از پیش سطح ولتاژ شاخه‌های نام برده در وضعیت‌های Cross Load (توزیع نامتوازن بار بر روی شاخه‌های خروجی)، Zero Load (وضعیت کاملاً بی‌باری) و به دنبال آن، اضافه شدن پروتکشن (NLO (No Load Operation به قابلیت‌های این سری از منابع تغذیه شده است.
 

پاورهای_سری_HED_گرین_یک_گام_جلوتر

نتیجه نهایی پیاده سازی این توپولوژی کاهش Voltage Regulation شاخه‌های اصلی به کمتر از %2.5 و همچنین واکش گذرا (Transient Response) به مراتب سریع‌تر از نسل قبل خواهد بود. علاوه بر این، بر خلاف اغلب منابع تغذیه در این رنج قیمت، قابلیت ارائه تمامی توان خروجی پاور تنها بر روی شاخه 12V+ نیز فراهم شده است. در واقع کاربرانی که قصد استفاده این سری از پاورها را بر روی سیستم های مدرن و مجهز به پردازنده و کارت های گرافیک پرمصرف دارند می توانند بدون هیچ گونه محدودیتی از نظر توزیع توان بر روی شاخه های خروجی از حداکثر کارایی تجهیزات حرفه ای خود بهره مند شوند.

 

  • عملکرد به‌مراتب سریع‌تر و دقیق‌تر پروتکشن های ایمنی

تراشه Supervisor در منابع تغذیه سوئیچینگ مدرن، مهم‌ترین بخش ناظر بر تمامی فعل و انفعالات انجام شده در آن محسوب می‌شود. در پاورهای سری  HEDاز تراشه Supervisorبه‌مراتب مدرن‌تر و دقیق‌تر نسبت به مدل‌های نسل قبل استفاده شده و سفارشی سازی‌های انجام شده در بایاسینگ آن، در عمل محدوده به‌مراتب تنگ‌تر و دقیق‌تر برای کنترل پروتکشن های ایمنی فراهم کرده است.

 

پاورهای_سری_HED_گرین_یک_گام_جلوتر


در واقع پاورهای نسل جدید HED همانند پاورهای رده بالا و گران قیمت موجود در بازار از تمامی پروتکشن های ایمنی حال حاضر پیاده سازی شده در منابع تغذیه سوئیچینگ مدرن پشتیبانی می‌کنند.

نوع و عملکرد پروتکشن های OVP/UVP/OCP/OPP/SCP/SIP/NLO در پاورهای HED گرین، به شرح ذیل می باشد:

 

(Surge & Inrush Protection (SIP

 به لطف تعبیه (MOV (Metal Oxide Varistor و همچنین NTC Thermistor در بخش ورودی، عملکرد و سلامت این نسل از پاورها در برابر جریان هجومی (Inrush Protection) و حتی Spike های شدید ولتاژ در ورودی بیمه شده است.

(Over Voltage Protection (OVP

در صورتی که محدوده ولتاژ هر یک از شاخه‌های خروجی از محدوده حداکثر ایمن تعیین شده در استاندارد فراتر رود، این پروتکشن بلافاصله منبع تغذیه را خاموش می‌کند

(Under Voltage Protection (UVP

در صورتی که محدوده ولتاژ هر یک از شاخه‌های خروجی از محدوده حداقل ایمن تعیین شده در استاندارد پایین تر رود، این پروتکشن بلافاصله منبع تغذیه را خاموش می‌کند

(Over Current Protection (OCP

در صورتی که به هر دلیلی جریان عبوری هر یک از شاخه‌های خروجی از محدوده ایمن تعیین شده در استاندارد فراتر رود، این پروتکشن بلافاصله منبع تغذیه را خاموش می‌کند

(Short Circuit Protection (SCP

 اتصال کوتاه یا Short Circuit زمانی اتفاق می‌افتد که امپدانس خروجی هر یک از شاخه‌های خروجی منبع تغذیه کمتر از 0.1 اهم شود. در واقع در صورتی که هر یک از شاخه‌های خروجی با یکدیگر و یا با به زمین (GND) اتصال کوتاه شوند، این  پروتکشن بلافاصله منبع تغذیه را خاموش می‌کند

(Over Power Protection (OPP

در صورتی که توان مصرفی مجموع شاخه‌های خروجی منبع تغذیه از مقدار تعیین شده در استاندارد فراتر رود، این پروتکشن بلافاصله منبع تغذیه را خاموش می‌کند

(No-Load Operation (NLO

این پروتکشن به منبع تغذیه این اجازه را می‌دهد تا حتی در صورتی که شاخه‌های خروجی آن به بار متصل نباشد بدون مشکل به فعالیت خود ادامه دهد. (نکته: اینتل از عبارت No-load Situation برای این پروتکشن در استاندارد ATX12V V2.4 استفاده نموده است. اما عموما این پروتکشن را به نام NLO می شناسند)

 

  • بهره‌مندی از خازن‌های الکترولیت و جامد باکیفیت تایوانی از نوع 105C در بخش اولیه و ثانویه

در منابع تغذیه سری HED در هر دو بخش اولیه و ثانویه از خازن‌های الکترولیتی باکیفیت تایوانی و با قابلیت کارکرد در دمای 105C استفاده شده است. این خازن‌ها در مقایسه با خازن‌های مشابه از نوع 85C بیش از 4 برابر عمر بیشتری دارند و به‌صورت محسوس در برابر ریپل جریان مقاوم‌ترند. ضمن اینکه در بخش DC-DC پاورهای HED از خازن های جامد با طول عمر بسیار بالا نیز استفاده شده است. همچنین بخش استندبای پاورهای HED به خازن های ژاپنی Nippon Chemi-Con با قابلیت کارکرد در دمای 105C مجهز شده است.
 

پاورهای_سری_HED_گرین_یک_گام_جلوتر
 

  • ریپل و نویز ولتاژ شاخه‌های خروجی حداکثر یک سوم استانداردهای جهانی

ریپل و نویز خروجی یکی از مهم‌ترین عوامل در کاهش عمر مفید پاور و تجهیزات متصل شده به آن محسوب می‌شود. ریپل ولتاژ شاخه‌ 12V+ خروجی پاورهای سری HED به‌واسطه توپولوژی مدرن پیاده سازی در بخش ثانویه و فیلترهای متعدد CLC حداکثر (35mV(pp می‌باشد که معادل کمتر از یک سوم محدوده مجاز در آخرین ویرایش استاندارد پاورهای ATX است.

  • فن فوق‌العاده کم صدا با عملکرد به مراتب هوشمندتر

به لطف کنترلر فن فوق‌العاده هوشمند در نظر گرفته شده برای پاورهای نسل جدید HED، نویز صوتی این مدل‌ها تا حدود %70 الی %80 توان نامی پاور بسیار پایین بوده و عملاً هیچ صدایی از فن پاور به گوش کاربر نخواهد رسید.

  • بازدهی مصرف انرژی (Efficiency) بالا و کسب گواهینامه 80Plus Bronze

برخورداری از مدرن‌ترین توپولوژی‌های روز در بخش‌های اولیه و ثانویه در کنار قطعات فوق‌العاده باکیفیت در ساخت پاورهای HED سبب شده تا حداکثر بازدهی مصرف انرژی نسل دوم این پاورها به حدود %88 برسد. این میزان بازدهی مصرف انرژی سبب شده تا این سری از پاورها موفق به کسب گواهینامه 80Plus Bronze شوند.

  • کابل‌های خروجی فلت و یک‎دست مشکی

در پاورهای سری HED از کابل‌های خروجی تماما مشکی و از نوع فلت (تخت) استفاده شده است. کابل‌های فلت نسبت به کابل های رشته ای متداول، انعطاف پذیرترند و کابل کشی قطعات را آسان‌تر کرده که نهایتا سبب زیبایی بیشتر اسمبل سیستم و تهویه بهتر هوای داخل کیس خواهد شد.

 

پیکربندی کابل های خروجی

 

جدول تقسیم جریان و توان شاخه های خروجی

General specifications
Series HED
Model GP480A-HED
Continuous Power 480W
Form Factor ATX PS2
Dimensions 86mm x 150mm x 140mm
Weight 1565 گرم
Case Color Black
Material SECC
Cable Management Type Fixed
Cables Type تماماً فلت
Regulatory CE, TUV, CB, FCC, CUL
Technical Specifications
ATX 12V Standard Version v2.4
80Plus 80PLUS BRONZE
AC Input 200-240Vac RMS
Input Current 4.5A
Working Humidity Range 90% - 20%
Continuous Output Rated Temperature 0C - 40C
Frequency 47Hz - 63Hz
230V Effceincy Range 88% - 85%
Average 230 V Efficiency 86.5%
Standby Power Consumption (ErP Ready (< 0.5W at Standby Mode
PFC Type Active PFC
Power Factor بیشتر از 0.95
Hold-Up-Time 16ms @ 80% Load<
Primary Side Topology Double-Forward
Secondary Side Topology Synchronous Rectification & DC-DC Converters
Primary Capacitor Type الکترولیت تایوانی از نوع 105C
Secondary Capacitors Type الکترولیت تایوانی / ژاپنی از نوع 105C
Protections OCP, OVP, UVP, OPP, SCP ,SIP, NLO
PowerGood Signal 100ms - 500ms
MTBF 100.000hrs @ 25°C, 230Vac, 50Hz
Fan Type & Size 120mm - Sleeve Bearings Fan
Number of output power connectors
MB 20+4 Pin 1 عدد
CPU 12V 4+4 Pin 1 Qty
PCI-e 6+2 Pin 1 Qty
SATA 6 Qty
4Pin Molex 3 Qty
FDD Connector 1 Qty
Current and power of output rails
12V Max Load+ 480W
Max 3.3V+ & +5V Combined Power 100W
Maximum +12V Output Current 40A
Maximum +5V Output Current 18A
Maximum +3.3V Output Current 18A
Maximum +5V/SB Output Current 2.5A
Maximum -12V Output Current 0.3A
Warranty / After-sales service
Warranty Period 37 ماه گارانتی و 5 سال خدمات پس از فروش

GP480A-HED Gallery

راهنمای نصب (User Manual)
کتابچه حاوی راهنمای نصب، مشخصات فنی و شرایط گارانتی
Size : 5.2MB
Green PSU Comparison Table
Full Technical Specifications comparison For GREEN Power Supplies
Size : 2.23MB
GREEN PSU Calculator Guide
Buying Guide and power consumption of PC hardware
Size : 1.69MB
GREEN Product Catalog
Full GREEN Product Catalog for Q3-2020
Size : 52.1MB

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.