In EUD GREEN series power supplies, you will experience most of the expensive and high-end's power supplies features at the lowest possible cost. DC-DC converters in the secondary section, complete safety protections exactly like high-end power, very precise voltage regulation, and very low output voltage ripple along with the 80Plus Bronze energy efficiency standard are just some of the valuable features of this series.

  •     Suitable for home/office/gaming applications
  •     Modern design based on highly efficient DC-DC converters in the secondary sector
  •     Ripple and noise less than 35mv Important rail 12V output
  •     Equipped with all-black flat cables for more beautiful assembly and better air circulation
  •     Ability to provide maximum output power even at ambient temperature up to 40C
  •     Has a power factor correction circuit (Active PFC) with performance higher than 0.95 in load conditions of 20% to 100%
  •     Use of Taiwan TEAPO / CAPXCON 105C electrolyte capacitors in primary and secondary parts
  •     No restrictions on the cross-loading of rails (CROSS-LOAD)
  •     Voltage regulation less than 2.5% in the main output rails
  •     High energy efficiency and 80Plus Bronze certification
  •     Has all OVP / UVP / OCP / OPP / SCP / SIP / NLO / OTP security protections
  •     Smart performance and extremely low fan noise
  •     37 months warranty and 5 years after-sales service

 

 


GREEN is proud to equip its low-cost, low-power power supplies with DC-DC converters in an unprecedented move. At present, most power manufacturers in the world implement this type of topology only in mid-range and high-end models of their products. Certainly, using the term "Low-class power supplies" for this new generation of GREEN power supplies with all these features and capabilities will not be a good option. Therefore, based on their power output range (330W-580W), it is better to use the phrase "Professional low capacity power supply".


 

  • Topology of DC-DC converters with Semi-Synchronous Rectification in the secondary section

 

Unlike the previous generation, whose secondary design was based on the Group Regulation topology, the EUD series power supplies use the latest and most modern design, DC-DC converters with synchronous rectification. In Synchronous Rectification technology, Schottky diodes are removed from the output section and completely replaced by Power MOSFETs. In the EUD generation, thanks to the use of high-quality MOSFETs (Low RDS (on), we see a significant increase in efficiency and a decrease in voltage drop and heat loss, which will significantly increase/stabilize the useful life and tolerance of the power supply against high heat.

 


Also, due to the installation of DC-DC converters in this section, the voltage of each of the main output rails ( 12V, 5V, 3.3V) is generated completely independently. In practice, this further stabilizes the voltage level of the named rails in Cross Load (unbalanced load distribution on the output branches), Zero Load (completely idle state) conditions, followed by the addition of protection (NLO) No-Load Operation.

      

The end result of implementing this topology will be a reduction in the Voltage Regulation of the main rails to less than 2.5%, as well as a much faster Transient Response than the previous generation. In addition, unlike most power supplies in this price range, the ability to provide all power output power only on the 12V rail is also provided. In fact, users who intend to use this series of power supplies on modern systems equipped with processors and high-consumption graphics cards can benefit from the maximum efficiency of their professional equipment without any restrictions in terms of power distribution on the output rails.

 

  • Faster and more accurate performance of safety protections

The Supervisor chip is the most important part of all switching power supplies in modern power supplies. In the EUD series power supplies, the Supervisor chip is much more modern and accurate than the previous-generation models, and the customizations made in its biasing, in practice, provide a much narrower and more precise range for controlling safety protections.

 

In fact, the new generation EUD power supplies, like the high-end and expensive power supplies on the market, support all the current safety protections implemented in modern switching power supplies. Description of the performance of OVP / UVP / OCP / OPP / SCP / SCP / SIP / NLO / OTP protections that Implemented in EUD power supplies:

 

  • Surge & Inrush Protection (SIP)

  Thanks to the installation of MOV (Metal Oxide Varistor) and also NTC Thermistor in the input section, the performance and health of this generation of power supplies are insured against inrush protection and even severe voltage spikes in the input.

 

  • Over / Under Voltage Protection (OVP / UVP)

If the voltage range of each output rail exceeds the specified safe minimum and maximum range, this protection immediately shuts off the power supply.

 

  • Overcurrent protection (OCP)

This protection shuts off the power supply if for any reason the current passing through any of the outlets is within the safe range.

 

  • Short circuit protection (SCP)

A short circuit occurs when the impedance of each output branch of the power supply is less than 0.1 ohm. In fact, in cases where each output rail is disconnected or grounded (GND), it cuts off a power supply.

  • Over Power Protection (OPP)

If the total power consumption of the output rails of the power supply exceeds the specified value, this protection immediately shuts off the power supply

  • Over Temperature Protection (OTP)

If, for various reasons, such as failure of the device fan, blockage of air inlets and outlets, or application of loads exceeding the rated power of the power supply at long distances, the internal heat of the power exceeds the specified value, this protection immediately shuts off the power supply.

  • No-Load Operation (NLO)

This protection allows the power supply to continue to operate even when the output rails are no longer in load. (Note: Intel uses the term No-load Situation for this protection in the ATX12V V2.4 standard. But this protection is generally known as NLO.)

 

  • Taiwanese 105°C quality electrolyte and solid capacitors in primary and secondary parts.

In EUD series power supplies, in both primary and secondary parts, high-quality electrolytic capacitors with the ability to operate at 105°C have been used. These capacitors are more than 4 times longer in life than similar 85°C capacitors and are significantly more resistant to current ripple.


 

  • Ripple and voltage noise of the output rails One-third of the world standards

 

The EUD series power supplies use all-black output cables of flat type. Flat cables are more flexible than conventional stranded cables and make parts easier to cable, which will ultimately make the system more beautiful and provide better ventilation inside the case.

The use of the most modern topologies of primary and secondary sections, along with extremely high-quality components is created in EUD power supplies so that the energy consumption efficiency of the second generation of these power supplies reaches about 88%. This energy efficiency has made this series of power supplies 80Plus Bronze certified.

Flat and all-black output cables

Thanks to the super-intelligent fan controller for the new generation EUD power supplies, the sound of these models is very low up to about 70 to 80% of the rated power of the power supply, and practically no sound is heard from the fan power supply.

High energy efficiency and 80Plus Bronze certification

Ripple and output noise is one of the most important factors in reducing the useful life of power supplies and related equipment. Ripple voltage of 12V rail output of EUD series power supplies by means of advanced implemented in the secondary section and multiple CLC filters has 35mV (pp) which is less than one-third of the range in the latest standard version of ATX power supplies.

Ultra-quiet fan with far smarter performance

 

GP580A-EUD power output cable configuration

 

General specifications
Series EUD
Model GP480A-EUD
Continuous Power 480W
Form Factor ATX PS2
Dimensions 86mm x 150mm x 140mm
Weight 1440 Gram
Case Color Black
Material SECC
Cable Management Type Fixed
Cables Type Fully flat (except main cable)
Regulatory CE, TUV, CB, FCC, CUL
Technical Specifications
ATX 12V Standard Version v2.4
80Plus 80PLUS BRONZE
AC Input 200-240Vac RMS
Input Current 4.5A
Working Humidity Range 90% - 20%
Continuous Output Rated Temperature 0C - 40C
Frequency 47Hz - 63Hz
230V Effceincy Range 88% - 85%
Average 230 V Efficiency 86%
Standby Power Consumption (ErP Ready (< 0.5W at Standby Mode
PFC Type Active PFC
Power Factor From 0.95
Hold-Up-Time 16ms @ 80% Load<
Primary Side Topology Double-Forward
Secondary Side Topology Synchronous Rectification & DC-DC Converters
Primary Capacitor Type Taiwanese electrolyte type 105°C
Secondary Capacitors Type Taiwanese electrolyte type 105°C
Protections OCP, OVP, UVP, OPP, SCP, OTP, SIP, NLO
PowerGood Signal 100ms - 500ms
MTBF 100.000hrs @ 25°C, 230Vac, 50Hz
Fan Type & Size 120mm - Sleeve Bearings Fan
Number of output power connectors
MB 20+4 Pin 1 Qty
CPU 12V 4+4 Pin 1 Qty
PCI-e 6+2 Pin 1 Qty
SATA 6 Qty
4Pin Molex 3 Qty
FDD Connector 1 Qty
Current and power of output rails
12V Max Load+ 480W
Max 3.3V+ & +5V Combined Power 100W
Maximum +12V Output Current 40A
Maximum +5V Output Current 18A
Maximum +3.3V Output Current 18A
Maximum +5V/SB Output Current 2.5A
Maximum -12V Output Current 0.3A
Warranty / After-sales service
Warranty Period 37 months warranty and 5 years after-sales service

GP480A-EUD Gallery

User Manual
Manual Containing Installation Guide And Technical Specifications
Size : 5.2MB
Green PSU Comparison Table
Full Technical Specifications comparison For GREEN Power Supplies
Size : 2.23MB
GREEN PSU Calculator Guide
Buying Guide and power consumption of PC hardware
Size : 1.69MB
GREEN Product Catalog
Full GREEN Product Catalog for Q3-2020
Size : 52.1MB

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.