There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

با استفاده از درگاهای خروجی تصویر موجود بروی دستگاه مانند HDMI و DisplayPort می توانید دستگاه خودر را به تلویزیون و مانیتور های دیگر متصل کنید.

وارد بخش Settings ویندوز 10 شوید در بخش Display با تغییر پارامتر Brightness شدت روشنایی را تغییر دهید یا بروی دسکتاپ خود راست کلیک کرده و گزینه Intel Graphic Properties انتخاب نمایید، سپس در بخش Display شدت روشنایی و سایر پارامترها را تعیین کنید.

در صورتی که دستگاه شما به صورت PIO می باشد برای نصب قطعات به ویدیو آموزشی موجود در DVD راه انداز دستگاه مراجع کنید یا با کارشناسان فنی شرکت پردیس صنعت سیاره سبز تماس بگیرید.

ابتدا اتصال آداپتور به برق و دستگاه را بررسی کنید ، درصورتی که دستگاه را به صورت PIO تهیه نمودید (در حالت PIO پردازنده ،رم و تجهیزات ذخیره سازی به همراه دستگاه ارائه نمی‌شود و کاربران می‌توانند متناسب با بودجه نیازشان قطعات فوق را تهیه نمایند)، از نصب صحیح و سلامت قطعات مطمئن شوید.

جهت سهولت در استفاده، کیبورد و ماوس این دستگاه به صورت بی سیم می باشد، از این رو برای راه اندازی باتری های موجود در پکیج را نصب کنید و پس از آن دانگل یا (فرستنده USB) را به یکی از USB های پشت دستگاه متصل کنید.

با توجه به بروز بودن سخت‌افزار دستگاه PIO طبیعی هست که سیستم عامل‌ها و نرم‌افزارهای قدیمی از جمله سیستم عامل ویندوز7، به صورت پیش فرض با این محصول سازگار نمی‌باشد، از این رو توصیه می‌گردد جهت نصب ویندوز سون از DVD موجود در متعلقات دستگاه استفاده کنید. در این DVD راهنمای نصب و درایورهای لازم برای شناسایی صحیح دستگاه در نظر گرفته شده است.

• مشتری گرامی با تشکر از انتخاب شما ، این کالا توسط GREEN گارانتی شده است و آسیب های ناشی از نقص فنی ، مواد بکار رفته و شرایط تولید در کلیه قطعات سخت افزاری شامل نمایشگر ، مادربرد ، مدار تغذیه ، ماژول wifi ، خنک کننده ، اسپیکر و آداپتور ، در صورت سلامت ظاهری و نداشتن آسیب فیزیکی ، مشمول گارانتی خواهد بود . دریافت این ضمانتنامه به منزله قبول شرایط توسط مشتریان می باشد.

• مدت زمان گارانتی دستگاه بر اساس تاریخ ذکر شده بر روی جعبه و کارت گارانتی دستگاه می باشد و ارایه خدمات گارانتی فقط با همراه داشتن کارت مقدور است. در هنگام خرید مشتری موظف به بررسی سلامت فیزیکی کالا ، وجود برچسب سریال و هولوگرام بر روی دستگاه و کارت گارانتی با تاریخ معتبر می باشد.

• مشتریان می بایست پیش از باز نمودن پلمپ پیچ های دستگاه برای اسمبل ، از سلامت فیزیکی و ظاهری PIOاطمینان حاصل فرمایند ، مخدوش شدن لیبل فوق به منزله تاییدیه مشتری مبنی بر سلامت ظاهری و فیزیکی دستگاه می باشد .
گارانتی PIO فقط شامل سخت افزارهای نامبرده در کارت گارانتی می باشد و گارانتی GREEN مسئولیتی در قبال عملکرد نرم افزاری ، خرابی و آسیب دیدگی قطعات اضافه شده ، عدم سازگاری و تناسب قطعات اضافه شده با PIO و عدم کارکرد در نرم افزارهای خاص را ندارد . لازم به ذکر است حتما پیش از تهیه سایر قطعات از سازگاری آنها با قطعات PIO اطمینان حاصل فرمایید.

• تمامی قطعات این کالا دارای سریال یکسان می باشند ، گارانتی صرفا شامل دستگاه هایی که سریال آنها مطابق با یکدیگر است می باشد.

• هرگونه تغییر در مشخصات فنی و قطعات دستگاه (ذکر شده در کارت گارانتی ) ، استفاده از قطعات دیگر روی شاسی PIO و یا تعمیرات دستگاه و قطعات آن توسط افراد غیر مجاز با تشخیص کارشناسان GREEN موجب ابطال گارانتی می گردد.

• آسیب های ناشی از استفاده از قطعات اضافه شده با برند های نامعتبر و غیر استاندارد ، اتصال پورت ها و حافظه های غیر استاندارد ، اتصال پورت های ورودی و خروجی به برق شهر ، صدمات ناشی از اتصال نادرست یا ارتباط با سایر دستگاه ها ، ورود مایعات و مواد شیمیایی ، سولفاته شدن ، نوسانات برق ، آتش سوزی و رعد و برق ، ضربه ، آسیب های ناشی از اسمبل ناصحیح ، سرویس توسط افراد غیر مجاز ، استفاده از لوازم مصرفی نامرغوب و غیر استاندارد ، شکستگی ، آسیب فیزیکی و ظاهری ، تخریب عمدی ، آسیب های وارده به کانکتورها ، اتصال ناصحیح خنک کننده و آسیب فیزیکی آن ، استفاده نادرست از دستگاه ، استفاده از آداپتور های متفرقه ، عدم وجود یا مخدوش شدن سریال ، هولوگرام و برچسب شناسایی کالا و کارت گارانتی و همچنین در مورد مادر برد ؛ صدمات و خرابی های ناشی از نصب یا به روزرسانی هر نوع فایل یا برنامه و نفوذ ویروس ، کج شدگی و یا شکستگی پایه های سوکت CPU ، هرگونه خراشیدگی ، تاب برداشتن و یا ترک برد ، تغییر رنگ و یا سوختگی ظاهری قطعات برد ، خم شدگی ، شکستگی و یا له شدگی پین ها ، قطعات ، اسلات ها و کانکتور های برد ، آسیب های ناشی از استفاده غیر استاندارد نظیر((OVERCLOCK ، عدم توجه به دفترچه راهنمای کالا و هرگونه ایراد فیزیکی دیگر با تشخیص کارشناسان GREEN ، شامل گارانتی نمی‌باشد.

• طبق استاندارد جهانی ارائه خدمات به دستگاه هایی با بیش از 3 پیکسل سوخته ( حداقل 4 پیکسل ) در صفحه نمایش انجام می پذیرد.

• استفاده غیر متعارف از صفحه نمایش یا جداکردن آن موجب ابطال گارانتی می گردد.

• حمل دستگاه به مراکز گارانتی در تهران و شهرستان ها به عهده خریدار می باشد (برای اطلاع کامل از نحوه ارایه خدمات در شهرستان ها به سایت شرکت مراجعه فرمایید).

• لطفا قبل از ارسال PIO به مراکز گارانتی و پس از تایید مشکل دستگاه بدون قطعات اضافه شده ، تمامی قطعات اضافه شده از روی دستگاه خارج و PIO به تنهایی ارسال گردد، گارانتی گرین در قبال هر گونه مشکل برای قطعات اضافه شده بر روی دستگاه ( سخت افزاری ، نرم افزاری ، آسیب دیدگی ) مسئولیتی بر عهده ندارد.

• تشخیص شکستگی ناشی از حمل نادرست دستگاه بر عهده کارشناسان GREEN می باشد.

• آسیب دیدگی فیزیکی بدنه و صفحه نمایشگر PIO شامل گارانتی نمی باشد و این قطعات در صورت امکان با اخذ هزینه های مربوط تعویض می گردد.

• گرین هیچ مسئولیتی در قبال فراموش شدن کلمه عبور بایوس و از بین رفتن اطلاعات موجود روی حافظه دستگاه را ندارد و مسئولیت تهیه نسخه پشتیبان از اطلاعات بر عهده مشتری می باشد.

• بازیابی کلمه عبور تنها با ارائه فاکتور معتبر خرید و استعلام از مراجع قانونی با اخذ هزینه های لازم در صورت امکان انجام خواهد شد.

• دستگاه های خارج از گارانتی در صورت امکان، با اخذ هزینه های مربوطه تعمیر خواهند شد.

• با توجه به تغییر و تحول سریع قطعات کامپیوتری ، در صورت نیاز به تعویض و موجود نبودن دستگاه با مدل اصلی ، دستگاهی با مدل مشابه و با احتساب قیمت روز اراِِیه خواهد شد.

This problem is related to the device Bios settings. To solve the problem; while turning on the device, enter the device's Bios environment by pressing the "Delete" key. Then press the F5 key and confirm the displayed message to call up the default settings. Finally, press F10 to save the default settings and exit the Bios environment.

This problem is related to the device Bios settings. To solve the problem; while turning on the device, enter the device's Bios environment by pressing the "Delete" key. Then press the F5 key and confirm the displayed message to call up the default settings. Finally, press F10 to save the default settings and exit the Bios environment.

The reason for this problem is the limitations on the new generation of Intel chipsets. Only versions of Windows 7 that have the appropriate drivers will be installed on this device. For this, use the Windows 7 image uploaded in the "Download" section of the product and the "Windows 7 Installation Tool" section under "Windows 7 Ultimate SP1 64-Bit MSDN".

The reason for this problem is the limitations on the new generation of Intel chipsets. Only versions of Windows 7 that have the appropriate drivers will be installed on this device. For this, use the Windows 7 image uploaded in the "Download" section of the product and the "Windows 7 Installation Tool" section under "Windows 7 Ultimate SP1 64-Bit MSDN".

Some high-end green power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. To test the performance in this mode, place the smaller key on the back of the power supply in the "l" position.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have a hot air ejection system inside the power supply. The operation of this system is such that up to about 1 to 2 minutes after the power is turned off, the fan continues to operate until the hot air inside the power supply is completely ejected.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. This key controls the operation of this system. This system works as long as this key is "O" (default mode). In case the key changes to "l" mode, this system will be deactivated and the device fan will work in any situation.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

Some high-end green power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. To test the performance in this mode, place the smaller key on the back of the power supply in the "l" position.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have a hot air ejection system inside the power supply. The operation of this system is such that up to about 1 to 2 minutes after the power is turned off, the fan continues to operate until the hot air inside the power supply is completely ejected.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. This key controls the operation of this system. This system works as long as this key is "O" (default mode). In case the key changes to "l" mode, this system will be deactivated and the device fan will work in any situation.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

Some high-end green power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. To test the performance in this mode, place the smaller key on the back of the power supply in the "l" position.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have a hot air ejection system inside the power supply. The operation of this system is such that up to about 1 to 2 minutes after the power is turned off, the fan continues to operate until the hot air inside the power supply is completely ejected.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. This key controls the operation of this system. This system works as long as this key is "O" (default mode). In case the key changes to "l" mode, this system will be deactivated and the device fan will work in any situation.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

برخی پاورهای رده بالای گرین (سری OC، OC+, OCPT, OCDG) دارای حالت Fanless Mode هستند. در این نوع پاورها فن پاور تا حدود %20 الی %30 توان نامی خاموش خواهد بود. برای تست عملکرد فن در این حالت کلید کوچک تر تعبیه شده در پشت پاور را در حالت " l " قرار دهید.

برخی پاورهای رده بالای گرین (سری OC، OC+, OCPT, OCDG) دارای سامانه تخلیه هوای گرم داخل پاور هستند. عملکرد این سامانه به گونه ای است که تا حدود 1 الی 2 دقیقه پس از خاموش شدن پاور، فن دستگاه کماکان به فعالیت خود ادامه می دهد تا هوای گرم داخل پاور به صورت کامل تخلیه شود.

برخی پاورهای رده بالای گرین (سری OC، OC+, OCPT, OCDG) دارای حالت Fanless Mode هستند. در این نوع پاورها فن پاور تا حدود %20 الی %30 توان نامی خاموش خواهد بود. این کلید عملکرد این سامانه را کنترل می کند. تا مادامی که این کلید در حال "O" باشد (حالت پیش فرض) این سامانه کار می کند. در حالتی که کلید به حالت " l " تغییر حالت دهد عملکرد این سامانه متوقف خواهد شد و فن دستگاه در هر وضعیتی کار می کند.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

برخی پاورهای رده بالای گرین (سری OC، OC+, OCPT, OCDG) دارای حالت Fanless Mode هستند. در این نوع پاورها فن پاور تا حدود %20 الی %30 توان نامی خاموش خواهد بود. برای تست عملکرد فن در این حالت کلید کوچک تر تعبیه شده در پشت پاور را در حالت " l " قرار دهید.

برخی پاورهای رده بالای گرین (سری OC، OC+, OCPT, OCDG) دارای سامانه تخلیه هوای گرم داخل پاور هستند. عملکرد این سامانه به گونه ای است که تا حدود 1 الی 2 دقیقه پس از خاموش شدن پاور، فن دستگاه کماکان به فعالیت خود ادامه می دهد تا هوای گرم داخل پاور به صورت کامل تخلیه شود.

برخی پاورهای رده بالای گرین (سری OC، OC+, OCPT, OCDG) دارای حالت Fanless Mode هستند. در این نوع پاورها فن پاور تا حدود %20 الی %30 توان نامی خاموش خواهد بود. این کلید عملکرد این سامانه را کنترل می کند. تا مادامی که این کلید در حال "O" باشد (حالت پیش فرض) این سامانه کار می کند. در حالتی که کلید به حالت " l " تغییر حالت دهد عملکرد این سامانه متوقف خواهد شد و فن دستگاه در هر وضعیتی کار می کند.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

Some high-end green power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. To test the performance in this mode, place the smaller key on the back of the power supply in the "l" position.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have a hot air ejection system inside the power supply. The operation of this system is such that up to about 1 to 2 minutes after the power is turned off, the fan continues to operate until the hot air inside the power supply is completely ejected.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. This key controls the operation of this system. This system works as long as this key is "O" (default mode). In case the key changes to "l" mode, this system will be deactivated and the device fan will work in any situation.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

Some high-end green power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. To test the performance in this mode, place the smaller key on the back of the power supply in the "l" position.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have a hot air ejection system inside the power supply. The operation of this system is such that up to about 1 to 2 minutes after the power is turned off, the fan continues to operate until the hot air inside the power supply is completely ejected.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. This key controls the operation of this system. This system works as long as this key is "O" (default mode). In case the key changes to "l" mode, this system will be deactivated and the device fan will work in any situation.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

Some high-end green power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. To test the performance in this mode, place the smaller key on the back of the power supply in the "l" position.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have a hot air ejection system inside the power supply. The operation of this system is such that up to about 1 to 2 minutes after the power is turned off, the fan continues to operate until the hot air inside the power supply is completely ejected.

Some high-end GREEN power supplies (OC, OC +, OCPT, OCDG series) have Fanless Mode. In this type of power supply, the power fan will be turned off up to about 20% to 30% of the rated power. This key controls the operation of this system. This system works as long as this key is "O" (default mode). In case the key changes to "l" mode, this system will be deactivated and the device fan will work in any situation.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

The temperature displayed on the water block of the Glacier EVO series coolers is actually the temperature of the coolant circulating in the cooler and differs from the temperature of the processor cores.

The reason for this problem is related to the fan speed control technique in the motherboard Bios settings. In the Bios settings, change the fan speed control technique to PWM Mode.

Due to the modern structure of the 9-bridge water pump used in GLACIER EVO series water coolers, some motherboards are unable to read the pump speed. It should be noted that this incompatibility in practice does not interfere with the efficiency and performance of this cooler.

Dear customer, while thanking you for your choice, this product is supported by the guarantee of GREEN, and the damages caused by the technical defects of the device, the materials used and the defects caused by the production,
They are included in the Green Warranty for 18 months.

• Please bring the box and all accessories of it with you when you visit.

• Any change in the main specifications, opening of the water block or transfer pipes of the device by unauthorized persons, damage to the connectors, and damage to the device serial; Will void the warranty.

• Any attempt to replace, increase or decrease the coolant will invalidate the warranty.

• If the warranty conditions are provided, this device will be repaired or replaced with a "brand-new" device at the discretion of the warranty experts.

• Due to the rapid change and evolution of computer parts, in the absence of the original model of the device, a similar device model and taking into account the current price, will be presented.

• This warranty only includes the water cooling device and in case of damage to other parts of the system, the GREEN Warranty will not be responsible.

• If your motherboard has a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin Waterblock socket to the "Pump_Fan" or "AIO_Pump" socket and the fans to the CPU_fan socket through the 1 to 2 conversions in the contents of the box (for models equipped with 240 / 360mm radiator).

• If your motherboard does not have a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin water block socket to the SYS_Fan or CPU_OPT socket and the fans to the CPU_Fan socket through the 1 to 2 conversions in the contents inside the box (for models equipped with 240 / 360mm radiator).

Since it is recommended to always set the rotation speed of the pump to the maximum for the best performance, most water cooling systems on the market have a pump with a 3Pin socket. Connecting 3Pin connectors to 4pin sockets is completely standard and only the PWM control feature will be disabled so the pump will always run at maximum speed.

GREEN water cooling fans are PWM type and can be controlled even with DC Voltage control technique. To do this, enable features such as Q-Fan or Smart Fan in your motherboard Bios settings.

• If you install the water cooling radiator on the roof or rear tray of the case:

- The fans should direct the air to the radiator and hot air should come out of the ceiling or behind the case.

• If you install the water cooling radiator on the front tray of the case:

- Fans must suck air from the outside to the inside of the radiator.

The temperature displayed on the water block of the Glacier EVO series coolers is actually the temperature of the coolant circulating in the cooler and differs from the temperature of the processor cores.

The reason for this problem is related to the fan speed control technique in the motherboard Bios settings. In the Bios settings, change the fan speed control technique to PWM Mode.

Due to the modern structure of the 9-bridge water pump used in GLACIER EVO series water coolers, some motherboards are unable to read the pump speed. It should be noted that this incompatibility in practice does not interfere with the efficiency and performance of this cooler.

Dear customer, while thanking you for your choice, this product is supported by the guarantee of GREEN, and the damages caused by the technical defects of the device, the materials used and the defects caused by the production,
They are included in the Green Warranty for 18 months.

• Please bring the box and all accessories of it with you when you visit.

• Any change in the main specifications, opening of the water block or transfer pipes of the device by unauthorized persons, damage to the connectors, and damage to the device serial; Will void the warranty.

• Any attempt to replace, increase or decrease the coolant will invalidate the warranty.

• If the warranty conditions are provided, this device will be repaired or replaced with a "brand-new" device at the discretion of the warranty experts.

• Due to the rapid change and evolution of computer parts, in the absence of the original model of the device, a similar device model and taking into account the current price, will be presented.

• This warranty only includes the water cooling device and in case of damage to other parts of the system, the GREEN Warranty will not be responsible.

• If your motherboard has a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin Waterblock socket to the "Pump_Fan" or "AIO_Pump" socket and the fans to the CPU_fan socket through the 1 to 2 conversions in the contents of the box (for models equipped with 240 / 360mm radiator).

• If your motherboard does not have a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin water block socket to the SYS_Fan or CPU_OPT socket and the fans to the CPU_Fan socket through the 1 to 2 conversions in the contents inside the box (for models equipped with 240 / 360mm radiator).

Since it is recommended to always set the rotation speed of the pump to the maximum for the best performance, most water cooling systems on the market have a pump with a 3Pin socket. Connecting 3Pin connectors to 4pin sockets is completely standard and only the PWM control feature will be disabled so the pump will always run at maximum speed.

GREEN water cooling fans are PWM type and can be controlled even with DC Voltage control technique. To do this, enable features such as Q-Fan or Smart Fan in your motherboard Bios settings.

• If you install the water cooling radiator on the roof or rear tray of the case:

- The fans should direct the air to the radiator and hot air should come out of the ceiling or behind the case.

• If you install the water cooling radiator on the front tray of the case:

- Fans must suck air from the outside to the inside of the radiator.

The temperature displayed on the water block of the Glacier EVO series coolers is actually the temperature of the coolant circulating in the cooler and differs from the temperature of the processor cores.

The reason for this problem is related to the fan speed control technique in the motherboard Bios settings. In the Bios settings, change the fan speed control technique to PWM Mode.

Due to the modern structure of the 9-bridge water pump used in GLACIER EVO series water coolers, some motherboards are unable to read the pump speed. It should be noted that this incompatibility in practice does not interfere with the efficiency and performance of this cooler.

Dear customer, while thanking you for your choice, this product is supported by the guarantee of GREEN, and the damages caused by the technical defects of the device, the materials used and the defects caused by the production,
They are included in the Green Warranty for 18 months.

• Please bring the box and all accessories of it with you when you visit.

• Any change in the main specifications, opening of the water block or transfer pipes of the device by unauthorized persons, damage to the connectors, and damage to the device serial; Will void the warranty.

• Any attempt to replace, increase or decrease the coolant will invalidate the warranty.

• If the warranty conditions are provided, this device will be repaired or replaced with a "brand-new" device at the discretion of the warranty experts.

• Due to the rapid change and evolution of computer parts, in the absence of the original model of the device, a similar device model and taking into account the current price, will be presented.

• This warranty only includes the water cooling device and in case of damage to other parts of the system, the GREEN Warranty will not be responsible.

• If your motherboard has a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin Waterblock socket to the "Pump_Fan" or "AIO_Pump" socket and the fans to the CPU_fan socket through the 1 to 2 conversions in the contents of the box (for models equipped with 240 / 360mm radiator).

• If your motherboard does not have a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin water block socket to the SYS_Fan or CPU_OPT socket and the fans to the CPU_Fan socket through the 1 to 2 conversions in the contents inside the box (for models equipped with 240 / 360mm radiator).

Since it is recommended to always set the rotation speed of the pump to the maximum for the best performance, most water cooling systems on the market have a pump with a 3Pin socket. Connecting 3Pin connectors to 4pin sockets is completely standard and only the PWM control feature will be disabled so the pump will always run at maximum speed.

GREEN water cooling fans are PWM type and can be controlled even with DC Voltage control technique. To do this, enable features such as Q-Fan or Smart Fan in your motherboard Bios settings.

• If you install the water cooling radiator on the roof or rear tray of the case:

- The fans should direct the air to the radiator and hot air should come out of the ceiling or behind the case.

• If you install the water cooling radiator on the front tray of the case:

- Fans must suck air from the outside to the inside of the radiator.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

This thermal paste, is used to fill microscopic gaps between the CPU, GPU, and heatsink surfaces of various water and air coolers.

This paste can be used on different types of processors (CPU), graphics processors (GPU), and motherboard chipsets.

Depending on the type of piece and on average you can use this dough between 8 to 15 times.

The life of this paste varies according to the temperature, temperature changes, humidity, and dust in the environment. Of course, even in the worst possible conditions, we guarantee the life of this paste for more than 3 years.

No. This paste is completely non-conductive and is considered electrically.

Yes. The chemical composition of this paste is toxic and dangerous. Avoid contact with skin as much as possible. Also, see a doctor immediately if swallowed.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

Dear customer, while thanking you for your choice, this product is supported by the guarantee of GREEN, and the damages caused by the technical defects of the device, the materials used and the defects caused by the production,
They are included in the Green Warranty for 18 months.

• Please bring the box and all accessories of it with you when you visit.

• Any change in the main specifications, opening of the water block or transfer pipes of the device by unauthorized persons, damage to the connectors, and damage to the device serial; Will void the warranty.

• Any attempt to replace, increase or decrease the coolant will invalidate the warranty.

• If the warranty conditions are provided, this device will be repaired or replaced with a "brand-new" device at the discretion of the warranty experts.

• Due to the rapid change and evolution of computer parts, in the absence of the original model of the device, a similar device model and taking into account the current price, will be presented.

• This warranty only includes the water cooling device and in case of damage to other parts of the system, the GREEN Warranty will not be responsible.

• If your motherboard has a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin Waterblock socket to the "Pump_Fan" or "AIO_Pump" socket and the fans to the CPU_fan socket through the 1 to 2 conversions in the contents of the box (for models equipped with 240 / 360mm radiator).

• If your motherboard does not have a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin water block socket to the SYS_Fan or CPU_OPT socket and the fans to the CPU_Fan socket through the 1 to 2 conversions in the contents inside the box (for models equipped with 240 / 360mm radiator).

Since it is recommended to always set the rotation speed of the pump to the maximum for the best performance, most water cooling systems on the market have a pump with a 3Pin socket. Connecting 3Pin connectors to 4pin sockets is completely standard and only the PWM control feature will be disabled so the pump will always run at maximum speed.

GREEN water cooling fans are PWM type and can be controlled even with DC Voltage control technique. To do this, enable features such as Q-Fan or Smart Fan in your motherboard Bios settings.

• If you install the water cooling radiator on the roof or rear tray of the case:

- The fans should direct the air to the radiator and hot air should come out of the ceiling or behind the case.

• If you install the water cooling radiator on the front tray of the case:

- Fans must suck air from the outside to the inside of the radiator.

Dear customer, while thanking you for your choice, this product is supported by the guarantee of GREEN, and the damages caused by the technical defects of the device, the materials used and the defects caused by the production,
They are included in the Green Warranty for 18 months.

• Please bring the box and all accessories of it with you when you visit.

• Any change in the main specifications, opening of the water block or transfer pipes of the device by unauthorized persons, damage to the connectors, and damage to the device serial; Will void the warranty.

• Any attempt to replace, increase or decrease the coolant will invalidate the warranty.

• If the warranty conditions are provided, this device will be repaired or replaced with a "brand-new" device at the discretion of the warranty experts.

• Due to the rapid change and evolution of computer parts, in the absence of the original model of the device, a similar device model and taking into account the current price, will be presented.

• This warranty only includes the water cooling device and in case of damage to other parts of the system, the GREEN Warranty will not be responsible.

• If your motherboard has a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin Waterblock socket to the "Pump_Fan" or "AIO_Pump" socket and the fans to the CPU_fan socket through the 1 to 2 conversions in the contents of the box (for models equipped with 240 / 360mm radiator).

• If your motherboard does not have a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin water block socket to the SYS_Fan or CPU_OPT socket and the fans to the CPU_Fan socket through the 1 to 2 conversions in the contents inside the box (for models equipped with 240 / 360mm radiator).

Since it is recommended to always set the rotation speed of the pump to the maximum for the best performance, most water cooling systems on the market have a pump with a 3Pin socket. Connecting 3Pin connectors to 4pin sockets is completely standard and only the PWM control feature will be disabled so the pump will always run at maximum speed.

GREEN water cooling fans are PWM type and can be controlled even with DC Voltage control technique. To do this, enable features such as Q-Fan or Smart Fan in your motherboard Bios settings.

• If you install the water cooling radiator on the roof or rear tray of the case:

- The fans should direct the air to the radiator and hot air should come out of the ceiling or behind the case.

• If you install the water cooling radiator on the front tray of the case:

- Fans must suck air from the outside to the inside of the radiator.

Dear customer, while thanking you for your choice, this product is supported by the guarantee of GREEN, and the damages caused by the technical defects of the device, the materials used and the defects caused by the production,
They are included in the Green Warranty for 18 months.

• Please bring the box and all accessories of it with you when you visit.

• Any change in the main specifications, opening of the water block or transfer pipes of the device by unauthorized persons, damage to the connectors, and damage to the device serial; Will void the warranty.

• Any attempt to replace, increase or decrease the coolant will invalidate the warranty.

• If the warranty conditions are provided, this device will be repaired or replaced with a "brand-new" device at the discretion of the warranty experts.

• Due to the rapid change and evolution of computer parts, in the absence of the original model of the device, a similar device model and taking into account the current price, will be presented.

• This warranty only includes the water cooling device and in case of damage to other parts of the system, the GREEN Warranty will not be responsible.

• If your motherboard has a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin Waterblock socket to the "Pump_Fan" or "AIO_Pump" socket and the fans to the CPU_fan socket through the 1 to 2 conversions in the contents of the box (for models equipped with 240 / 360mm radiator).

• If your motherboard does not have a 4Pin socket called "Pump_Fan" or "AIO_Pump":

- Connect the 3Pin water block socket to the SYS_Fan or CPU_OPT socket and the fans to the CPU_Fan socket through the 1 to 2 conversions in the contents inside the box (for models equipped with 240 / 360mm radiator).

Since it is recommended to always set the rotation speed of the pump to the maximum for the best performance, most water cooling systems on the market have a pump with a 3Pin socket. Connecting 3Pin connectors to 4pin sockets is completely standard and only the PWM control feature will be disabled so the pump will always run at maximum speed.

GREEN water cooling fans are PWM type and can be controlled even with DC Voltage control technique. To do this, enable features such as Q-Fan or Smart Fan in your motherboard Bios settings.

• If you install the water cooling radiator on the roof or rear tray of the case:

- The fans should direct the air to the radiator and hot air should come out of the ceiling or behind the case.

• If you install the water cooling radiator on the front tray of the case:

- Fans must suck air from the outside to the inside of the radiator.

Note that this fan supports the PWM technique for speed control. Make sure PWM capability is enabled in the motherboard BIOS for the desired fan socket.

The lighting controller is not installed in the accessories that come with this fan. To activate RGB lighting, the system motherboard must be equipped with a 4GB (12V) RGB socket. It will also be possible to set up RGB lighting using 4GB (12V) RGB side controllers.

RGB lighting The GF120-RGB fan is compatible with all motherboards equipped with 4Pin (12V) RGB sockets.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

No, this series of cables actually connects to the ends of the main power cables and adds to the length of the main cables.

No. This model is fully compatible with all standard power supplies on the market.

The reason for this problem is related to the fan speed control technique in the motherboard Bios settings. In the Bios settings, change the fan speed control technique to PWM Mode.

The reason for this problem is related to the fan speed control technique in the motherboard Bios settings. In the Bios settings, change the fan speed control technique to PWM Mode.

با استفاده از درگاهای خروجی تصویر موجود بروی دستگاه مانند HDMI و DisplayPort می توانید دستگاه خودر را به تلویزیون و مانیتور های دیگر متصل کنید.

وارد بخش Settings ویندوز 10 شوید در بخش Display با تغییر پارامتر Brightness شدت روشنایی را تغییر دهید یا بروی دسکتاپ خود راست کلیک کرده و گزینه Intel Graphic Properties انتخاب نمایید، سپس در بخش Display شدت روشنایی و سایر پارامترها را تعیین کنید.

در صورتی که دستگاه شما به صورت PIO می باشد برای نصب قطعات به ویدیو آموزشی موجود در DVD راه انداز دستگاه مراجع کنید یا با کارشناسان فنی شرکت پردیس صنعت سیاره سبز تماس بگیرید.

ابتدا اتصال آداپتور به برق و دستگاه را بررسی کنید ، درصورتی که دستگاه را به صورت PIO تهیه نمودید (در حالت PIO پردازنده ،رم و تجهیزات ذخیره سازی به همراه دستگاه ارائه نمی‌شود و کاربران می‌توانند متناسب با بودجه نیازشان قطعات فوق را تهیه نمایند)، از نصب صحیح و سلامت قطعات مطمئن شوید.

جهت سهولت در استفاده، کیبورد و ماوس این دستگاه به صورت بی سیم می باشد، از این رو برای راه اندازی باتری های موجود در پکیج را نصب کنید و پس از آن دانگل یا (فرستنده USB) را به یکی از USB های پشت دستگاه متصل کنید.

با توجه به بروز بودن سخت‌افزار دستگاه PIO طبیعی هست که سیستم عامل‌ها و نرم‌افزارهای قدیمی از جمله سیستم عامل ویندوز7، به صورت پیش فرض با این محصول سازگار نمی‌باشد، از این رو توصیه می‌گردد جهت نصب ویندوز سون از DVD موجود در متعلقات دستگاه استفاده کنید. در این DVD راهنمای نصب و درایورهای لازم برای شناسایی صحیح دستگاه در نظر گرفته شده است.

• مشتری گرامی با تشکر از انتخاب شما ، این کالا توسط GREEN گارانتی شده است و آسیب های ناشی از نقص فنی ، مواد بکار رفته و شرایط تولید در کلیه قطعات سخت افزاری شامل نمایشگر ، مادربرد ، مدار تغذیه ، ماژول wifi ، خنک کننده ، اسپیکر و آداپتور ، در صورت سلامت ظاهری و نداشتن آسیب فیزیکی ، مشمول گارانتی خواهد بود . دریافت این ضمانتنامه به منزله قبول شرایط توسط مشتریان می باشد.

• مدت زمان گارانتی دستگاه بر اساس تاریخ ذکر شده بر روی جعبه و کارت گارانتی دستگاه می باشد و ارایه خدمات گارانتی فقط با همراه داشتن کارت مقدور است. در هنگام خرید مشتری موظف به بررسی سلامت فیزیکی کالا ، وجود برچسب سریال و هولوگرام بر روی دستگاه و کارت گارانتی با تاریخ معتبر می باشد.

• مشتریان می بایست پیش از باز نمودن پلمپ پیچ های دستگاه برای اسمبل ، از سلامت فیزیکی و ظاهری PIOاطمینان حاصل فرمایند ، مخدوش شدن لیبل فوق به منزله تاییدیه مشتری مبنی بر سلامت ظاهری و فیزیکی دستگاه می باشد .
گارانتی PIO فقط شامل سخت افزارهای نامبرده در کارت گارانتی می باشد و گارانتی GREEN مسئولیتی در قبال عملکرد نرم افزاری ، خرابی و آسیب دیدگی قطعات اضافه شده ، عدم سازگاری و تناسب قطعات اضافه شده با PIO و عدم کارکرد در نرم افزارهای خاص را ندارد . لازم به ذکر است حتما پیش از تهیه سایر قطعات از سازگاری آنها با قطعات PIO اطمینان حاصل فرمایید.

• تمامی قطعات این کالا دارای سریال یکسان می باشند ، گارانتی صرفا شامل دستگاه هایی که سریال آنها مطابق با یکدیگر است می باشد.

• هرگونه تغییر در مشخصات فنی و قطعات دستگاه (ذکر شده در کارت گارانتی ) ، استفاده از قطعات دیگر روی شاسی PIO و یا تعمیرات دستگاه و قطعات آن توسط افراد غیر مجاز با تشخیص کارشناسان GREEN موجب ابطال گارانتی می گردد.

• آسیب های ناشی از استفاده از قطعات اضافه شده با برند های نامعتبر و غیر استاندارد ، اتصال پورت ها و حافظه های غیر استاندارد ، اتصال پورت های ورودی و خروجی به برق شهر ، صدمات ناشی از اتصال نادرست یا ارتباط با سایر دستگاه ها ، ورود مایعات و مواد شیمیایی ، سولفاته شدن ، نوسانات برق ، آتش سوزی و رعد و برق ، ضربه ، آسیب های ناشی از اسمبل ناصحیح ، سرویس توسط افراد غیر مجاز ، استفاده از لوازم مصرفی نامرغوب و غیر استاندارد ، شکستگی ، آسیب فیزیکی و ظاهری ، تخریب عمدی ، آسیب های وارده به کانکتورها ، اتصال ناصحیح خنک کننده و آسیب فیزیکی آن ، استفاده نادرست از دستگاه ، استفاده از آداپتور های متفرقه ، عدم وجود یا مخدوش شدن سریال ، هولوگرام و برچسب شناسایی کالا و کارت گارانتی و همچنین در مورد مادر برد ؛ صدمات و خرابی های ناشی از نصب یا به روزرسانی هر نوع فایل یا برنامه و نفوذ ویروس ، کج شدگی و یا شکستگی پایه های سوکت CPU ، هرگونه خراشیدگی ، تاب برداشتن و یا ترک برد ، تغییر رنگ و یا سوختگی ظاهری قطعات برد ، خم شدگی ، شکستگی و یا له شدگی پین ها ، قطعات ، اسلات ها و کانکتور های برد ، آسیب های ناشی از استفاده غیر استاندارد نظیر((OVERCLOCK ، عدم توجه به دفترچه راهنمای کالا و هرگونه ایراد فیزیکی دیگر با تشخیص کارشناسان GREEN ، شامل گارانتی نمی‌باشد.

• طبق استاندارد جهانی ارائه خدمات به دستگاه هایی با بیش از 3 پیکسل سوخته ( حداقل 4 پیکسل ) در صفحه نمایش انجام می پذیرد.

• استفاده غیر متعارف از صفحه نمایش یا جداکردن آن موجب ابطال گارانتی می گردد.

• حمل دستگاه به مراکز گارانتی در تهران و شهرستان ها به عهده خریدار می باشد (برای اطلاع کامل از نحوه ارایه خدمات در شهرستان ها به سایت شرکت مراجعه فرمایید).

• لطفا قبل از ارسال PIO به مراکز گارانتی و پس از تایید مشکل دستگاه بدون قطعات اضافه شده ، تمامی قطعات اضافه شده از روی دستگاه خارج و PIO به تنهایی ارسال گردد، گارانتی گرین در قبال هر گونه مشکل برای قطعات اضافه شده بر روی دستگاه ( سخت افزاری ، نرم افزاری ، آسیب دیدگی ) مسئولیتی بر عهده ندارد.

• تشخیص شکستگی ناشی از حمل نادرست دستگاه بر عهده کارشناسان GREEN می باشد.

• آسیب دیدگی فیزیکی بدنه و صفحه نمایشگر PIO شامل گارانتی نمی باشد و این قطعات در صورت امکان با اخذ هزینه های مربوط تعویض می گردد.

• گرین هیچ مسئولیتی در قبال فراموش شدن کلمه عبور بایوس و از بین رفتن اطلاعات موجود روی حافظه دستگاه را ندارد و مسئولیت تهیه نسخه پشتیبان از اطلاعات بر عهده مشتری می باشد.

• بازیابی کلمه عبور تنها با ارائه فاکتور معتبر خرید و استعلام از مراجع قانونی با اخذ هزینه های لازم در صورت امکان انجام خواهد شد.

• دستگاه های خارج از گارانتی در صورت امکان، با اخذ هزینه های مربوطه تعمیر خواهند شد.

• با توجه به تغییر و تحول سریع قطعات کامپیوتری ، در صورت نیاز به تعویض و موجود نبودن دستگاه با مدل اصلی ، دستگاهی با مدل مشابه و با احتساب قیمت روز اراِِیه خواهد شد.

به دلیل عدم ارائه درایور از سوی اینتل این درایور تنها با تراشه گرافیکی Intel UHD Graphics 630 (در پردازنده های Core i3/i5/i7/i9 نسل 8 و 9 اینتل) سازگار است و با پردازنده های Pentium و Celeron سازگاری ندارد.

This problem is related to the device Bios settings. To solve the problem; while turning on the device, enter the device's Bios environment by pressing the "Delete" key. Then press the F5 key and confirm the displayed message to call up the default settings. Finally, press F10 to save the default settings and exit the Bios environment.

This problem is related to the device Bios settings. To solve the problem; while turning on the device, enter the device's Bios environment by pressing the "Delete" key. Then press the F5 key and confirm the displayed message to call up the default settings. Finally, press F10 to save the default settings and exit the Bios environment.

The reason for this problem is the limitations on the new generation of Intel chipsets. Only versions of Windows 7 that have the appropriate drivers will be installed on this device. For this, use the Windows 7 image uploaded in the "Download" section of the product and the "Windows 7 Installation Tool" section under "Windows 7 Ultimate SP1 64-Bit MSDN".

The reason for this problem is the limitations on the new generation of Intel chipsets. Only versions of Windows 7 that have the appropriate drivers will be installed on this device. For this, use the Windows 7 image uploaded in the "Download" section of the product and the "Windows 7 Installation Tool" section under "Windows 7 Ultimate SP1 64-Bit MSDN".

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

• The expiration date of the power supply is indicated on the barcode label of the device serial number (installed on the power supply and product box) and the GREEN warranty criterion for after-sales service support is only at the same date.

• Any damage or tampering with the barcode, the serial number of the device, or the sealing label of the power supply guarantee will invalidate.

• Environmental conditions for using switching power supplies such as temperature range, humidity, and basic ventilation are listed on the technical specifications label and manual. Power operation outside the mentioned conditions will void the warranty.

• Any physical damage such as melting and deformation of connectors, burning and any damage to wires, deformation, and paleness of the metal box caused by improper transportation and operation will void the warranty.

• Switching power supply warranty only includes technical defects due to power generation operations, technical defects due to opening the power door by unauthorized persons, tampering with internal circuits, incompatibility of power output for power supply with consumable hardware and installation in non-standard places and conditions, etc. is not included in the warranty service.

• Any damage caused by impact, natural disasters, fire, city power fluctuations, physical damage, fluid ingress is not covered by the warranty.

• Any physical damage, breakdown, or damage caused by improper operation by unconventional software and hardware outside the technical specifications of Power such as non-computer industrial applications (such as LED boards) and crypto-currency extraction (mining) will void the warranty.

• In case of general system damage to your PC components, according to our experts, GREEN Warranty will ONLY include the provision of services to the Power supply. Other hardware components and information stored by the user will not be covered by our warranty services.

• In all modular and semi-modular power supplies, each model has its own special cables. Replacing the cables with miscellaneous samples and not approved by GREEN experts or using other series cables and different models of GREEN power supplies on another model will invalidate the warranty.

• Any change in the specifications of the device and its opening by unauthorized persons will invalidate the warranty.

• Due to the rapid growth and development of computer parts, in the absence of the original model of the device, alternative models are offered, taking into account the price difference of the time being.

• Defective power supply to sales agents or warranty service office for replacement (according to warranty conditions), repair, or complete technical testing is the responsibility of the buyer.

1. Please make sure that the power cord is properly connected and that the power button on the back of the power supply is on.

2. Please ensure the correct and complete connection of all cables as well as the correct direction of the connectors to your system.

3. Make sure there is no short circuit in the system. To do this, remove one of the system components from the circuit each time and try again.

4. If any of the above happens to you, unplug the power supply for 2 minutes and turn it off. Then reconnect the power supply.

5. If Power fails to turn on the system in compliance with any of the above, please contact GREEN after-sales service.

For this purpose, from the top menu of the website, click on the "Calculator" section. Then, select the technical specifications of your parts. Finally, this system introduces the appropriate power supply compatible with your system.

Complete testing of switching power supplies requires specialized equipment and trained personnel. Using the following trick, you can ensure the initial health of your power supply:

- First disconnect all power connectors from the system and power supply. Then connect the desired power to the power wall outlet and turn on the power switch on the back of the power. Next, connect the green wire (pin number 15) and one of the black wires (pin number 16) to the 24-pin power connector using a wire. If the power fan turns on, your power supply is apparently in "OK" status.

- For 12V+ voltage (yellow wires) maximum 5% ± Nominal value: 12.6V+ to 11.4V+

- For voltage 5V+ (red wires) maximum 5% ± Nominal value: 5.25V+ to 4.75V+

- For voltage 3.3V+ (orange wires) maximum 5% ± Nominal value: 3.47V+ to 3.14V+

- For 5VSB+ voltage (paint wire) maximum 5% ± Nominal value: 5.25V + to 4.75V+

- For voltage 12V- (blue wire) maximum 10% ± Nominal value: 10.8V- to 13.2V-

Yes. Thanks to the Active PFC circuit and the protections provided in the input section of the GREEN power supplies, there is no need to worry about connecting this type of UPS to all models of GREEN power supplies.

No. Strictly avoid connecting cables of different models to other models. The arrangement of the pins, the diameter of the wires and the metal alloy of the connectors is unique in different families of GREEN power supplies. Use only the cables inside the power box or the cables approved by the GREEN after-sales service unit.

No. Most PCIe risers on the market carry even more power than the standard for PCIe x16 (about 75W). However, according to ATX standards, SATA and molex connectors have a maximum power transfer of 54W. This means that 21W is applied more to these connectors and this will cause many problems for the user.

The processor power connector (E-ATX) in all green power supplies is of 4 + 4 pin type, which are connected to each other through a special socket. To separate this socket, just pull the socket out from both sides.

This blank pin corresponds to a voltage of -5V. This voltage has been removed in power supplies with ATX12V v2.01 and above. As a result, all modern and new power supplies do not have this pin.

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

- If you live in Tehran, send your defective device with all accessories and boxes to GREEN after-sales service unit at the following address:
No.215, Between Gharani Ave & Nejatollahi St, Somayeh St

- If you live in Iran but not in Tehran, find the nearest after-sales service Agents to your place of residence on the "Agents" page and deliver the defective device to the desired representative.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)

The disadvantages of non-standard cases include the following:
* Interference of electromagnetic waves
* Impossibility of correct installation of parts inside non-standard cases
* Lack of strength of the panel and the body of the case
* Do not use the HD port in the audio output and non-standard output input ports
* Despite mentioning the USB2.0 port on the case, most cheap cases on the market have a USB1.1 port
* Lack of uniformity of glands in the integrated case system and the possibility of failure if there is a problem with the system input power
* Lack of proper ventilation of parts

By referring to the technical "Specifications" table of the case (maximum length of the graphics card) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main manufacturer of the graphics card

By referring to the technical "Specifications" table of the case (maximum cooling height and the possibility of installing water cooling) and matching the number entered in the technical specifications table with the dimensions mentioned by the main cooler's manufacturer

By referring to the technical "Specifications" table of the case (maximum power length) and matching the number inserted in the technical specifications table with the dimensions mentioned by the main power manufacturer

By referring to the table of technical "Specifications" and matching the number entered with the desired number of storage devices

* The physical aspect of Case's warranty:
As you know, physical damage to any piece of hardware will not be covered by the warranty, and the physical warranty of the case is only for new products and before the system assembly. Therefore, it is recommended that you take a physical look at the case in the presence of the seller and make sure that its appearance is fine.

* Warranty of electronic and mechanical parts of the case:
However, you may not be able to make sure that some of the electronic and mechanical components of the case are in good condition by observing them. Therefore, all electronic components of GREEN cases, including USB and Audio ports, as well as mechanical components, including pre-installed fans of the case, will be covered by the GREEN Warranty for a period of 24 months from the date of manufacture. It should be noted that the warranty of these electronic and mechanical parts will not include their physical damage.

Due to the impossibility of investigating the problem that has arisen in the company's internal transportation system or by the esteemed buyer, it is definitely recommended to take a closer look at the case in the presence of the seller and make sure of the appearance of its body. Otherwise, providing services to physically damaged cases will involve cost and possibly time due to supply the part.

To install the fans by default on the case by GREEN is correct, but if you want to move or add a fan to the case, it is necessary to pay attention to the following points:
* To enter the cool air from the front, it is on the main door of the case and the bottom of the case
* For hot air outlet from the back and roof of the case
* In all standard fans, on the back of the fan, where the label of technical specifications and the name of the fan are mentioned, which is the output and direction of the fan flow in this direction.

In general, there are three types of sockets for connecting case fans:
a) 3-pin socket
b) 4-pin PWM socket
c) 4-pin Molex socket
The 3-pin and 4-pin PWM sockets must be connected to your motherboard, or if there is a controller fan on the case, it must be connected to the case controller fan, and in these two models it is possible to control the fan speed by the motherboard or the controller fan.
The 4-pin Molex model connects directly to the system power supply and it is not possible to control the fan speed

In this video, the reasons and solutions to solve this problem are fully explained:

https://www.aparat.com/v/1gxWG

If you encounter a special case in which you could not choose the right case, you can call +982188911378 (ext. 7551 to 7555) and our experts will answer your questions in this regard.

There are many factors involved in choosing the right case.
* Ability to install standard and convenient parts
* Proper cooling potential and cooling system
* Strength and stability commensurate with the internal components
* features such as input and output ports of the case
* Appearance and functionality with the place of use of the system (office, home, gaming, server and industrial)